63/32-2RSNRC3 Ball Bearing

Available single or double row
Due to the raceway geometry and the balls used as rolling elements, deep groove ball bearings can support loads in both directions, as well as radial loads
Available in standard, C2, C3, C4, C5 clearance fit

Available as Open, Sealed or Shielded

Open - These bearings have no seals or shields to prevent the ingress of contaminating particles entering the raceways, this does however make them particularly useful when fitting in gearboxes or running in oil
Sealed - These bearings have the suffix 2RS indicating they have lip seals on both sides and are pre-filled with grease for life, so no lubrication is required. The seals give some protection against ingress of moisture and contaminating particles entering the raceways, thus increasing the life of the bearing. Some applications require only 1 seal which can easily be removed.
Shielded - These bearings have the suffix 2Z or ZZ indicating they have gap shields on both sides and are pre-filled with grease for life, so no lubrication is required. The shields give some protection against ingress of moisture and contaminating particles entering the raceways, thus increasing the life of the bearing. Some applications require only 1 shield which can easily be removed.

More Information
Brand	=	SEMRI
Manufacturer Part Number	=	32x75x20mm
Inside Diameter	=	32mm
Outside Diameter	=	75mm
Width	=	20mm
Seals or Shields	=	2RS or 2 Rubber seals indicating they have lip seals on both sides and are pre-filled with grease for life, so no lubrication is required. The seals give some protection against ingress of moisture and contaminating particles entering the raceways, thus i
Material	=	Steel
Clearance	=	C3 = Internal clearance, simply put, a greater internal clearance between the inner race, outer race and the rolling element, when heat is generated the rolling element expands into the clearance incorporated in production
Rows of Balls	=	1
Snap Ring Groove	=	Yes With Snap Ring